The Print Mount Company, Inc.
Home ] Up ]

 


PRINT MOUNT has a comprehensive offering of products to turn photographic or lithographic prints into simulated artists’ works on canvas.  Specifically formulated for the Canvas Transfer/Canvas Bonding process, all our canvas is pre-coated with heat activated, permanently bonding adhesive.  We offer three unique weaves of commercial canvas to produce a range of canvas texture from fine to coarse.  Choose the canvas texture that best suits your clients’ expectations, or that best enhances the photo or print being transferred.

 

FINE

weave canvas is our best-selling adhesive coated canvas. This 7 oz 100% cotton artist’s canvas is double-primed, then coated with our FABRIC MOUNT Heat Activated Adhesive.  This canvas produces a pleasant amount of texture that is well suited to contemporary decorating.  It has a very regular, tight weave with good depth of thread.  

MEDIUM

weave canvas is a 10 oz traditional artist’s canvas, primed and coated with our FABRIC MOUNT Heat Activated Adhesive.  This canvas produces a good amount of texture, best suited to the reproduction of 18th and 19th Century canvasses.

COARSE

weave canvas is a 12 oz traditional artist’s canvas, primed and coated with our FABRIC MOUNT Heat Activated Adhesive.  This canvas is highly textured, making it the popular choice for transferring photographic media.

FABRIC MOUNT

adhesive is a superior, multi-purpose liquid adhesive that boasts excellent bond strength.  It is well suited to canvas or fabric bonding, but can also be used to bond almost any two substrates, including wood, metal, plastic, paper and mounting board.  FABRIC MOUNT can be used while wet or can be allowed to dry and then activated with heat (150-210°F).  It can be applied by foam brush, paint roller or spray gun.  When wet, it can be thinned and cleaned up with water.  Once dry, it can be cleaned with lacquer thinner.

BRUSH STROKE GEL

Clear acrylic glazing gel for adding brush stroke texture to canvas transfers or mounted prints.   Artist’s gel medium with UV inhibitors, polymer extenders for greater working time and binders for enhanced brush stroke definition.  Dries clear in 1-3 hours.

STRETCHER BARS

Interlocking, expandable artist’s stretcher bars available in whole inch sizes from 8” to 60”.  Brace stock and Single Sided Strainer stock available also.

 

AVAILABLE SIZES:

PRODUCT NAME

PRODUCT CODE

SIZE

FINE Canvas Pre-Coated w/

CCFW60

60” W, cut to length

Heat Activated Adhesive

CCFW6018

60” W x 6 yd

MEDIUM Canvas Pre-Coated

CCMW59

59” W, cut to length

w/Heat Activated Adhesive

CCMW5918

59” W x 6 yd

COARSE Canvas Pre-Coated

CCCW59

59” W, cut to length

w/Heat Activated Adhesive

CCCW5918

59” W x 6 yd

FABRIC MOUNT Liquid

FAB MT ONE

1 gal (3.785l)

Heat Reactivatible Adhesive

FAB MT FIVE

5 gal (18.925l)

BRUSH STROKE GEL

BSGQT

1 qt (.95l)

Clear Acrylic Glaze for Brush Stroke

BSGGAL

1 gal (3.785l)

Texturing of Canvas Transfers

BSG5GAL

5 gal (18.925l)


The Print Mount Company, Inc.
Mounting & Laminating Equipment, Supplies & Services.
20 Industrial Drive Smithfield, RI 02917
Orders: 1-800-531-9690 Phone: 1-401-232-0096 Fax: 1-401-232-1893